What Is the Fix for the Error 3048 3 in Norton Antivirus?

In this blog, we are going to solve one of the common issues found after installing the Norton antivirus from Norton.com/setup. It’s the Error 3048 3, which we assume you are experiencing at the moment. Well, here are a few methods that may eradicate this error in no time. Let’s get started with the troubleshooting.

Error 3048 3

First of all, let us recall the symptoms that you may be facing in your Norton account:

  1. The Error 3048 3 appears and crashes the active program window.
  2. Your computer system crashes with this error often times, while running the same program.
  3. The operating system tends to run sluggishly and gives delayed responses to the mouse or/and the keyboard.
  4. Periodic freezing of your PC for a few seconds at a time.

There could be a lot of causes of the Error 3048 3, primarily being a corrupted download or incomplete installation of the Norton setup. But don’t worry because you can try out the below-explained methods to eliminate the error.

Fix 1. Run a full malware scan in your PC.

In many cases, it is found that the 3048 3 error is caused by a malware infection on your PC. A malware can damage or even delete files related to runtime errors.

Fix 2. Clean junk and temporary files from your PC.

You PC, from time to time, accumulate junk files that are retained from normal web browsing and computer use. Hence, you should clean this junk lot occasionally to leave no chance of file conflicts or an overloaded hard drive.

Fix 3. Update device drivers in your PC.

The Error 3048 3 is also caused by outdated or corrupt drivers. Hence, it is important to check all the drivers of your PC.

The above three fixes are only some of them. To know more about Norton error troubleshooting, it is recommended that you contact an authorized Norton customer support.

How to Recover Deleted or Lost Files and Photos from iPhone

It is easier to delete pictures on mobile phones than it is to capture them. At times, users delete cherished photographs or relevant files from their phones. In the haste to free up their phone’s memory, they end up removing important stuff. Losing your treasured memoirs forever is disastrous. However, time and again it happens that users make the terrible mistake of deleting important files or pictures. If you have accidentally deleted something and want to recover it, then do not fret. There are a couple of ways which will help you recover deleted or lost files and photos from your iPhone.

How to recover deleted pictures from iPhone?

If you have accidentally or purposely deleted an image from your iPhone’s gallery and want to get it back, then read on. The photos on an iPhone are kept in the Photos application. The Photos application in MacOS and iOS are quite similar. It comes with a month-long grace period which allows users to restore deleted media stored in the Photos application.

If you have deleted any pictures from your iOS device and wished to retrieve it, then go to the Photos app. Head to Albums located at the lower right-hand side of the app. Go below and find the Recently Deleted album. Select it from the list.

The media files which were removed permanently in the previous thirty days will be listed in the album. They will contain information about till when the user can recover them. If thirty days have not passed since you deleted the image or video, then you can reclaim it.

When you open the deleted image, you will see two options: Recover Photo and Cancel. Tap on the Recover Photo option, and the picture will get shifted to the iPhone gallery.

How to recover pictures and files from Backup?

You need to know that if you have turned on the feature, then whatever you delete from the iOS device, gets removed from the iCloud as well.

Therefore, if you are somebody who often needs to reclaim deleted files, then you should get Dropbox on your iPhone. Dropbox is a fantastic cloud storage application.

  1. Just create an account on Dropbox and install the application on your device.
  2. Launch the app and go to Settings.
  3. Select Camera Upload and enable it.
  4. Now, whenever you snap pictures, their copies will get moved to Dropbox.
  5. Go to Dropbox and tap on Photos tab.
  6. You will now be able to see all the pictures that have been uploaded lately.
  7. Any deleted picture will also be present in the Camera Uploads folder.
  8. Choose the picture and hit the Share button.
  9. Select Save Image from the list of options.

By using a cloud storage application, you can prepare yourself well in advance. IF you remove any important file from your iPhone, then you can reclaim it.

Mir Ariif  is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cybersecurity, cryptography, malware, social engineering, internet and new media. He writes for Norton security products at norton.com/setup

Tips On How To Fix Norton’s current on-line vault login issues?

Fix Norton’s current on-line vault login problems – Norton Identity Safe could be a free service to store your countersign and MasterCard manager. It stores organize and access your personal knowledge with security. So as to access of these options, you only ought to keep in mind the username and countersign.   Norton.com/setup

NORTON’S current on-line VAULT LOGIN problems

Due to network error, a user could face Norton’s current on-line vault login problems that deny your access to Identity Safe on-line vault in Norton. Weak net association or alternative network problems could lead to this error. The lack of the network to return out of hibernation mode conjointly a reason for this error.

Before you begin with the steps to mend the error, we have a tendency to advocate you to go to Norton Update Center. Update your package for higher a result. Otherwise, the error should persist.

METHOD : close and so LOG IN YOUR NORTON ACCOUNT

SIGN OUT

  • Launch the Norton Application.
  • Go to the Settings.
  • Click on careful Settings and so Identity Safety.
  • Click on assemble to verify your identity to the appliance.
  • Click on the e-mail address button and select sign on as totally different user.
  • Restart your device.

SIGN IN

  • Launch the Norton Application.
  • Go to the Settings.
  • Click on careful Settings and so Identity Safety.
  • Press the assemble button on your screen.
  • Choose sign on or produce associate degree account.
  • Enter your email address and countersign.
  • Now sign on to your account.
  • In the Vault Closed window, enter your vault countersign and Open.

If you’re still facing the error strive consequent technique.

Note: just in case you forget your Vault countersign then you’ll be able to retrieve your countersign by mistreatment countersign hint.

If you’re still unable to recover your countersign then produce a brand new vault. The Symantec doesn’t store your countersign it’s solely far-famed to you.

For Install Norton : www.norton.com/setup

How to enable Root User and access the parts of Mac?

Mac users often wonder how to enable the Root User account in the system. Hence this guide is mentioning the methods and steps to enable the Root User account in Mac systems. You need to go deep into your Mac to enable this account, but before proceeding with the method, you should know the reason for enabling the account.

Mac has some files which cannot be accessed through a user account. The Root User account allows you to access these files and move them without setting any complexities. The file deletion, recovery and scanning becomes easier in the account. But, the modification or changes in these files can cause severe damage or harm to the Mac system. So you must acknowledge the necessity to enable the Root User account and access the files.

Here is how to enable Root User and access the parts of Mac

Create the Root User Account

To create the Root User account, you will require to refer the System Preferences of your Mac.

  1. Click the Apple logo and a drop-down menu list will open.
  2. Now, click System Preferences from the menu.
  3. Select the Users & Groups.
  4. Move to the bottom left of the window and click the lock icon.
  5. Enter the Admin username and password.
  6. Click the Login Options and click to Join tab.
  7. Click the Open Directory Utility tab.
  8. Again, click the lock icon from the left bottom of the corner.
  9. Enter the password and go to Directory Utility.
  10. Click Edit from the toolbar and select Enable Root User option.
  11. Type a password. Ensure that the password should not match with the admin account and you can remember it.
  12. When you are done with providing the password, click Ok.
  13. You just created the Root User account.

The Terminal is an alternative method to create a Root User account.

Press Command + N key combination to open Finder window in your Mac.

  1. Click Application and move to click Utility option.
  2. Now click to launch Terminal.
  3. Type the command – dsenableroot and press the Return or Enter key.
  4. The admin username will display.
  5. Now, enter the admin password.
  6. Press Return key.
  7. You may require to enter the password again and press Enter.
  8. The Terminal will pop up the Root User message.

Log into Root User account

It is not complicated to log into the Root User account on the Mac system. The login is similar to other accounts.

  1. Log out of the current account from your Mac.
  2. Now, the Mac login screen will appear.
  3. Click the Other option.
  4. Now enter the login credentials which you recently created for your Root User account.
  5. The account will look like a regular user account, but the difference is that the account is allowing to access every file in the system.

If you do not require the Root User, then you can disable the account.

  1. Click the Apple logo and open the drop-down menu.
  2. Click System Preferences and move to Users & Groups option.
  3. Click the lock icon and proceed to enter the admin password.
  4. Click the Login Options and select Join tab.
  5. Go to the Open Directory Utility and click the Edit tab.
  6. Now select Disable, the Root User.

Remember, you must access the Root User account only when it is necessary or else the modification in the files may change the settings of the system. The Root can make the system vulnerable and easy prey to malware, hence it is a piece of advice to log out of the account and return to the regular account on your Mac system.

About us:

Dawn Martin is a self-professed security expert; she has been making the people aware of the security threats. Her passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. She writes for Norton security products at norton.com/setup